Although his site is in Japanese, he’s absolutely dedicated to The Handy setups, and it’s super helpful.
It looks like we can get most of the gear for TheHandy, including mounts and lubricating grease, from his store, but we’ll probably need to use Zenmarket.
I believe I saw this here on Eroscripts, maybe in this thread, but I was looking for a hands-free setup for lying down in bed and came across someone’s who had used a bar / hand clamp and to hold the top and bottom caps, and then secured the clamp’s rail between the jaws of a hobby vise, and then attached the vise to an a-frame style guitar stand. I think it’s a great one, and use mine all the time.
Thought i could share my Hands Free Handy mount solution here.
here is a belt attached handy mount with extra top cap and structural side bars to make sure it won’t pop out of the lower holder.
the top cap has a extruding groove shape so that you can have it positioned against a table corner or an additional 3D mounted counter piece you can for example hot glue under your table.
additionally i find this mount works if you are lying on bed / sofa and just have some blanket sort of stabilize the upper side, and the additional groove shape helps catch onto whatever you are stabilizing it with.
in Blender view the uppercap is wrong way around but you could really have it either way around you want.
design also features a curved section on the front side which props up against stomach for those of us who have a bit larger bellies hahaha, also everyone knows that the handy can get a bit warm/hot on some longer or intense sessions. helps to keep the heat away from your skin.
bit of a warning or a note, while i did try to round the corners of the cutout at the back for the action, those still remained a bit uncomfortable in use, i printed mine in PLA so i just gave it a little lick of Propane Torch and hand modified them after print to not be so pointy.
i also like to have like a micro fiber cloth folded up between me and the mount to help with some of the rougher edges due to the 3D printing finish and to not have the rather uncomfortable metallic belt buckle against skin either. a better solution could possibly be to get some foam or something and glue it onto the underside but the cloth is a good solution as its by its very nature removable and washable
Files include:
Base
Top
Connector Bar (print 4x)
under table attachment
For assembly you are going to need 4x bolt & nuts (holes made for M6 size bolts, for nuts nylon locking recommended), Optional Washers, and a belt of your choosing.
new_base.stl (1.3 MB)
new_top.stl (2.7 MB)
side_bar.stl (31.9 KB)
table_attachment.stl (2.4 KB)
so this isnt much assembly rather it just buying stuff from amazon, having a chair, and a desk clamp for the osr2.
Amazon.com: 31.6" Steel Extra Tall 2-Section Monitor Arm Pole with C-Clamp/Grommet Base | Sturdy Center Pole Only for Monitor Stand Mounts, Adjustable Height, Compatible with C-Clamp & Grommet Bases,Black : Tools & Home Improvement
reason for this is the extra length give you alot of wiggle room for adjustment for seated for bed.
Amazon.com: MOUNT PRO Single Long Monitor Arm, 13 to 32 inch Computer Monitor Desk Mount, Extra Long Adjustable Screen Stand, Tall Display Mount with Tilt, Swivel, Rotation, Hold up to 19.8lbs, VESA 75/100mm : Electronics
doesnt necessarily need to be this but a monitor arm with 2 pivot points rather than 1 makes adjustment easier
Desk Mount for osr2
screws and silicone tiped nuts for the vesa mount and osr2 desk mount
this will just hold everything together. The silicone at the end of the nut will hold a tighter screw against movement.
You can either attach this hole thing to your desk or attach it to a chair and have it at the side of your bed
