How to use scripts in VR - picture guide (Heresphere / Whirligig)

That’s because you can’t see funscript files in local browser, only videos. As long as the name of the funscript and the video is the same and they are in the same folder it should automatically load the script without problems.

1 Like

Appreciate the help I got it working now

Will the same method work on apple computers

I’m not really familiar with mac. What headset and device do you have?

Hi. I dont have a device yet. I’m looking at purchasing the Kiiroo Keon. Also that brings me to my next question. Is it a must to have a VR headset to use the interactive and connected features of the toys and scripts or will they work without the headset as well. Is the headset only needed for VR vids. And of I only synced without the headset it will just sync the strokes to the on screen action. Hope this makes sense.

Every script will be working with or without the headset, you can even use scripts without the videos, but for VR it’s recommended to have one. VR videos are similar to the flat videos, but you can look around for better immersion, kinda like Google Street View.

I know you can use Whirlgig with mouse to watch VR videos on Windows PC/laptop without the headset but the image will be a little distorted. I don’t think there is a way to watch VR videos on Mac without the headset but maybe there was someone with similar question earlier, you can try checking in the Help section.

I would look here to see how to connect Keon to your Mac:

1 Like

Sorry if this should be obvious. Are there any demo clips with scripts that I can use to just try this out and see if it’s all working? Obviously I can test using the videos at HandyFeeling but those don’t need me to add a script and connect direct to the Handy instead. I’d like to explore scripting but could use something to try just to see if I’ve got things working with my Oculus Quest and DeoVR.

There are 4 free interactive videos from CzechVR. You need to click on the small handy button on the left side of the download banner. After it opens right click and “save as”. For some reason it wanted to save it as ".txt " file in my case so just change the extension to “.funscript” and it should work:
https://www.czechvr.com/free-full-vr-porn-videos-download

And there is one free scene on SLR with a script afaik. You need to create free account to download the video:

Thanks. I discovered the recordings and scripts for the Handy MultiControl sessions and am trying to test that out, but I can’t get them to work using DLNA (Plex) in DeoVR. I have checked all the instructions at Interactive Sex Toy Scripts Complete Help Guide (Kiiroo,Vorze,Handy,Lovense)) - SLR community forum for the best VR porn videos and everything is fine as far as I can tell - I already had “Other” as my library type and the filenames are identical on both the script and video file except for the extensions of course. But the script just never plays. Handy is synced and works within DeoVR at HandyFeeling just fine. But I can’t get it to work over DLNA.

Appreciate any tips anyone has! :smiley:

Hey Husky, sorry to bother you but I’m having an issue with ‘Using ScriptPlayer with DeoVR / Whirlgig (for Launch, Keon etc.)’.
I am using Keon, Quest 2 and DeoVR and after enabling remote control like instructed, ScriptPlayer states:
DeoVR
Not connected.
Open settings menu in selection scene or file browser. Toggle switch ‘Enable remote control’.
I have restarted my computer, opened each program in order, and also allowed ScriptPlayer to be allowed past the firewall.
All ScriptPlayer setting are default from installation.
Any suggestions on what can be done as I have been trying to solve this for days now with no resolve. Thanks.

2 Likes

I used to have this problem and from what I remember it was connected to Windows Firewall. I think you need to open either 9943 or 9944 port in Firewall settings for both Whirlgig and Scriptplayer, but I am not sure, it was long time ago. Maybe try disabling Firewall for a minute and see if it connects?

1 Like

Hi, it wont play in my headset, despite remote control being turned on and everything all linkjed up…any ideas why?

image
image

@gem_090909
You should give a bit more information so that people can try to help.
Which VR headset do you use?
How do you connect the VR headset?
Do you stream directly from SLR, play local files on your computer/headset or use a DLNA server and stream from that?
Is it the video you have problem playing?
Is it the script that won’t load?

For the last one, the most common issue is that the video and the script isn’t named exactly the same (with the exception of the file extension).

sorry. So im using a quest 2 via Airlink on PC (1080ti) with The Handy. I have Scriptplayer connected to DEOVR, which has been configured to accept remote control. As per the instructions at the start of this thread I left DEOVR on whilst I requested Scriptplayer to use DEOVR, whcih it detected fine (screen shot above confirming this). The Handy is Synched (as per image above), but when I drop a video and script in script player (locally) it is not sending the video to play in DEOVR and the handy does not play the script. Script and video and named correctly, I went through all that already. Basically DEOVR is not receiving instuctions from Scriptplayer to play the video/script since it doesn launch the video

Also, ive just tried to connect The Handy to regular online mode for SLR (not local and via Airlink - i also tried via native Quest 2) and although The SLR/DEOVR app says it recognises The Handy and has sent the scripts, The Handy does not play the script. I have tried using Funscript to check if the connection is working and it does - the funscript website operates The Handy fine

Lots of good information there. I hope someone who owns a Quest 2 can help you. I use HTC Vive so unfortunately I can’t help you with this. Too many unknown variables :frowning:

1 Like

I think that you are doing it wrong:

  1. Make sure that both video and script are in the same folder and named the same.
  2. Open Scriptplayer and make sure DeoVR is connected (you figured it out already so you should be good to go)
  3. Open the video in DeoVR (NOT in Scriptplayer). The Scriptplayer should automatically load the script once you open the video in DeoVR if you’ve done 1st step correctly.

I think the step 3 is the problem because you try to open the video in Scriptplayer instead of DeoVR.

Updated the guide with the Heresphere.

4 Likes

Hi- im following your guide but can’t get it to work.

I followed the youtube guide to get HereSphere to work, loading it from SideQuest. I have my Quest2 connected to the PC via a cable- and im trying to watch videos for my Handy.

The problem im meeting is that there is nowhere in HereSphere to navigate to my local drive- I can only see folders that looks like the Quest 2 storage. What am I missing!? Wish this step was included in your guide.

Thanx

For now I will link to the different thread, but if you want to see folders from your PC you have to setup SMB server:

HereSphere VR Video Player for Quest 2 has native script support for the Handy - #31 by beyto

image

image

image

I might add this later. Hope this is enough for now.