The difficulty I had understanding the o-rings would have been solved had I studied the pictures a little more. They go around the shaft of the link and help keep the rubber bands from sliding toward the middle of the shaft. The English translation in the assembly instructions was a little confusing to me.
The GitHub links to the products for sale were also welcome, I missed them on Fantia. The price on both kits seems very fair but shipping and U.S. tarrifs may make it less appealing.
Sorry we haven’t been very active lately—we’ve been quite busy over the past few weeks. We should have more time starting this weekend, so we’re planning to gradually move the programs currently in development, including CDR Scripter, over to GitHub and make them publicly available. Thanks for your patience!
We’ve released CDR Player! It makes it easy to synchronize CDR01 with scripts. Compared with MultiFunPlayer, it can connect to CDR01 right away without any Wi‑Fi setup. However, it cannot be synchronized with other devices at the same time.
We’ve also released CDR Scripter! It’s a tool for efficiently creating scripts for CDR01.
Both tools are still under development, so they may contain bugs. The manuals are also currently being prepared. Please feel free to ask if you have any questions!
Bluetooth appears to be connected, but the Wi‑Fi connection has not completed. The CDR01 firmware may be outdated, or it may not be responding correctly to the Wi‑Fi Setup Tool.
First, switch to Advanced Setup Mode (詳細設定モード) and click Connect (デバイス接続).
After the device is connected, enter VERSION in the Command (任意コマンド) field and click Send (送信).
If the following response appears in the log, as shown below, the firmware is v0.4.1:
Thank you for checking. We have not been able to reproduce the issue where < VERSION is displayed repeatedly.
First, please install the latest firmware, v0.4.1, and then try sending the VERSION command again using the Wi‑Fi Setup Tool.
If VALUE version CDR01 firmware 0.4.1 still does not appear and only < VERSION is repeated, we would like to isolate the issue by sending commands over a USB serial connection instead of Bluetooth.
There are several tools available for USB serial communication, but for Windows, we recommend the free Tera Term application because it is relatively easy to use.
How to send commands with Tera Term
Connect the CDR01 to your PC using a USB-C data cable.
Open Device Manager in Windows and check the COM port number under Ports (COM & LPT).
sir, there is a new problem, left one led is normal, like what you said in the manual, but when i open right one, the led color is red and twinkle, but it acts normal when i play scripts
The red blinking LED most likely indicates that the battery voltage is low or is being detected as low.
However, we would like to check whether this is caused by the battery itself or by the right CDR01 unit’s battery connection or voltage measurement.
Please open Advanced Setup Mode in the Wi‑Fi Setup Tool, connect to the right CDR01, and send the following commands one at a time from the Command field:
BATTERY
LED_STATUS
Please share the responses from both commands.
For reference, a normal device may return results similar to: