SSR1PCB - EU ONLY - same day shipping - 30€

General Sales
1

I have a limited supply of SSR1PCB to sell - 30€ + shipping (~10€).
Boards are available while this post is up. The post will be removed once they are no longer available. Please DM me and let me know whether you need the motor/fan connectors soldered.

1 Like
2

More information on shipping

within Germany:
3€ Warenversand
7€ DHL Paket.
or whatever alternative you wish to use
11€ EU members
13€ non EU like UK or Switzerland
16€ Norway

1 Like
3

upon popular request, here is a guide on how to flash the SSR1PCB:

Step-by-Step Instructions:

  1. Connect Your PCB:
  • Connect your PCB to the computer and open Device Manager.
  • Navigate to the “Ports” section. You should see a device listed similar to the one shown below:
    image

Note: Your COM port will be different. If the device is listed, you can proceed to flashing the firmware.

  • If the device is not listed, you need to install the USB drivers in step 2, else move to step 3
  1. Install USB Drivers (optional):
  • Download the drivers from here.
  • After downloading, extract the file (this is important).
  • Right-click on silabser and choose “Install.”
    image
  1. Download Firmware and Flashing Tool:
  • You need to log in to Patreon to download Khrull’s firmware and flashing tool. Registration is free.
  • Go to this link and download TCode_ESP32_Release_v0.4b-esp32doit-devkit-v1-bldc.zip.
  • Extract the downloaded file.
  1. Flash the Firmware:

  • Connect your USB-C cable to the PC if you haven’t done so already.

  • Run flash.exe .

  • The flashing tool should look like this:
    image

  • Go to the “Flash” tab and click “Flash.” Wait until the process is complete.

  1. Configure Wi-Fi Settings:
  • Go to the “Wi-Fi” tab and enter your Wi-Fi settings.
  • Open your browser and go to http://tcode.local.
  • Click on the menu in the top right corner and choose “Import Settings.”
  • Select the following file: userSettings_0.4b_.json (6.3 KB)

You should now have successfully flashed your SSR1PCB and configured it with the necessary settings.

1 Like