Context
Not sure if anyone will find it useful but I recently bought a FUNSR1 and wanted something to be able to reuse the Stanley vice I’ve been using for the Handy. Didn’t find anything matching what I needed so decided to try making it.
Notes
- This uses the same 4 screws that come with the FUNSR1 used for the VESA mount
- The hole spacing should line up perfectly and the whole piece should be almost flush with the FUNSR1
- New to 3d printing and this is my first attempt at any 3d modeling so I messed up with the sizing on the screw holes.
- I suggest using something to pre-drill or expand the holes by a small amount
Printing settings
Bambu Lab P1S 0.4 nozzle with 0.20mm Strength Profile
Auto supports on
46g filament used
Download
Please feel free to modify/update the design as needed and if anyone has suggestions on how to improve it I’d love to hear it. I probably won’t print another one until this one breaks but it would help others.
https://files.catbox.moe/fav8t3.stl
Preview
