1000g VS 500gļ¼
If thatās the case, I think this result is reasonable because itās equivalent to twice the value of 0.7 to 1.2 times.
I mentioned the video where @Falafel does a test with a 1000g toy
Iāve been looking around for instructions on maintenance and where to oil the machinery, but have come up empty handed. Thought this might be a good place to ask.
Short story. I recently got one and it only lasts about a half hour before overheating or jamming, not sure which one it is yet. My experience with the Handy is that these problems mostly go away after getting it oiled up nice. Hoping for the same with the FUNSR1; although the mechanism is clearly different from the Handy.
You can try adding a little lubricant to the guide rail. At the same time, the tightness of the belt will have a great impact on the noise level.
Thanks for the reply. I popped it open and thereās still ample grease on the two guide rails, so not sure I want to apply any more. Also donāt have a problem with the sound and the belt seems tight to me, so Iād rather not adjust that either.
Do you know why itās turning off on me? When it does the green light on the side will flash a handful of times (havenāt counted the exact number) and then the light will turn off. After about a minute (havenāt timed this either) it will automatically āreconnectā to MultiFunPlayer even though I donāt have auto connect turned on. I put reconnect in quotes as Iām not sure if it ever disconnected. Iām assuming the stoker is ignoring inputs for a timeout period or until a temperature gauge is within tolerances, or something of that nature.
If I tell MultiFunPlayer to disconnect and reconnect the stroker will calibrate (move to max position, then move to the mid point) and then jump to the current location of the playing funscript, and then turn off again. If I wait maybe 45 seconds (slightly less that the time it will āreconnectā) it will calibrate and continue playing the funscript for a few minutes before it turns off again.
When it turns off, the bottom of the device is a little warm to the touch, but not hot like the Handy is when it overheats. It may just be that the motor is more insulated from the case than the Handy.
1 Like
hello, may I ask how to connect funsr1 to slr(deoVR) directly without desktop?
Funsr1ās bluetooth canāt be detected
@renwoxing Hoping I can get a little more help. Sometime after my last post my FUNSR1 stopped working. The motor would just seize up and basically vibrate when turning on. I figured the motor broke and thought I would repair it myself.
I ordered the same motor thatās in it (iPower GM4108) and then it sat in my closet for 6 months while I procrastinated fixing it. 
Anyway I decided to swap out the motor today and the new motor is behaving the same way. To make sure I was remembering correctly I plugged the old motor back into the board and when turning it on it just rattles on my desk.
Any advice on what else could be broke and what I could do to fix it?
Thanks!
This troubleshooting issue canāt be explained in a single sentence, so Iāve messaged you privately.
In China, the Spring Festival is a festival similar to Christmas, so we have arranged a holiday. (I will reply to messages, but the frequency of checking them will be reduced. Also, the main impact is that we wonāt be able to ship orders during the holiday.)
The holiday period is from February 13rd to February 24th (Beijing time).
We will ship all orders placed by February 11 before the holiday. Orders from February 12 onwards will be processed after we return from the holiday break.
Thank you all for your company and support throughout the year. We truly appreciate it!
Wishing everyone a happy New Year
Does the hands free stand work for the new funsr1?
Yes, same setup. It has two 1/4 female thread on top.
1 Like
Have you had this issue? Is a noise and smell with FUNSR1 normal/common?