G90ak Edition OSR2+ Feedback Thread

Hey guys! So, I have had the g90ak edition of the OSR2+ for about 3 weeks now. I wanted to take my time learning the basics of this product before I wrote my review. For starters I want to address the elephant in the room and let everyone know that the entry level for the OSR2+ is not extremely high. I have read countless posts from people that claim they are not tech savvy enough and that they are unaware if this would be the product for them. I would consider myself leaning more towards the side of “plug and play,” and this device, with the perfect step by step instructions supplied by g90ak, is as close to plug and play as DIY can get! SO, do not worry about whether you can get this thing up and running. It will take some time getting all the finer details down, but I promise it will be worth it. For me, it took about an hour to get it set up from opening the package to play.

A couple of quick bullet points:
-Fast shipping (I live domestic)
-The package was safely wrapped and even double boxed!
-G90ak provides the option to purchase multiple different adapters for sleeves
-G90ak provides step-by-step start up instructions for the OSR2+ (Includes links to programs and photos)
-G90ak offers servo upgrades! (I got Flash Hobby for stealth)
-G90ak is also very resourceful and a pleasure to chat with when you come across issues!
-G90ak provides a free “before purchase guide” that I highly recommend reading!
-The product comes with a desk mount!

Now moving on to my main issue with the OSR2+. I have only found one issue, but it is the problem all DIY products face. You must keep up with the maintenance of your unit. I am formally a handy user and the most I had ever done for it was to re-grease the screw in the trackpad every other month. Very minimal maintenance for a product that is mass produced but the handy is simply not comparable to the OSR2+. The OSR2+ is a 3D printing masterpiece with multiple parts. My biggest issue with the OSR2+ is you must retighten the screws every now and then. That is it! My routine is to check the screw tightness on the arms after I use the unit. This way they will be ready to go the next time I pull the unit out. Extremely basic stuff but I thought I would mention it for the new guys like me before they mess around and lose a screw due to poor maintenance.

Adapters Galore!

G90ak offers several types of adapters for the OSR2+ but the base receiver holds fleshlights. I own the onahole and flight adapters. I have used both adapters and the main receiver enough to notice that the experience is drastically different depending on the choice of sleeve. If you have a collection of sleeves like me, I highly recommend grabbing extra adapters from g90ak. They are solid quality and affordable for people without access to a 3D printer. They are also extremely easy to install and swap around. I typically like to just pick a specific type of sleeve I am going to use before I start the session, so I have never swapped them around mid-session. Would not surprise me if it were doable though! A quick little ranking of my favorite adapters and sleeves I have used with the OSR2+.

  1. Fleshlight Flight adapter with the Fleshlight Pilot
  2. Base Fleshlight receiver with Kumzumi
  3. Onahole receiver with Lips (Handy Sleeve Dream Collection)
  4. Base Fleshlight receiver with Waifu
  5. Base Fleshlight receiver with Destroya

This review is getting exceedingly long, but I wanted to address the points I saw that needed to be addressed. I was extremely overwhelmed initially reading about the OSR2+ but thanks to G90ak’s guide, I was able to better understand the basics of this device. I still have a lot to learn but, in this review, I hope I was able to clear the worry from some of my fellow “plug-and-play" users! I highly recommend the g90ak edition of the OSR2+ and I will be coming back in the future!

3 Likes
  1. Super responsive and helpful with any questions or concerns, so don’t be afraid to ask any questions.

  2. Payment was easy, it was made fast and shipped fast, with tracking.

  3. Setup guide was easy, but it really depends on how tech savy you are, I’ve personally worked with computers and programming for quite a while, but I can even tell that the instructions where quite clear and precise.

  4. Item was shipped with standard shipping, you can probably pay for fast shipping if you really wanted to, otherwise it came to me within a few days. Boxed pretty securely.

  5. Print quality was good, no noticeable defects (which is fairly normal with 3D prints). Attention to detail was awesome, everything worked as intended.

  6. I didn’t take a look at exactly what servos I received since I asked for “upgraded servos”, but they are doing good with no issues so far.

  7. @g90ak is doing a great job for the community by offering a service for an reasonable rate. Which allows people to get into the multi-axis space

1 Like

At risk of sounding repetitive I had a similarly positive experience to others

  1. G90ak is really easy to talk to, and responded as quickly as could be expected with my fucked up sleep cycle
  2. Payment was straightforward / processed by standard avenues and shipping was fast once it got shipped out. I had a delay because of a mix up with servos I asked to be put in and he was very accommodating
  3. The setup guide he provided helped a lot and made the initial experience a lot easier. I would have been pretty lost without it.
  4. Packaging was solid, didn’t have any concerns about damage from shipping
  5. Product quality is very nice, I almost forgot this was 3d printed because of how smooth the finish is and how sturdy it feels. No fitting issues, noticeable defects, etc.
  6. I got the flash hobby servos mentioned back in the initial post G90ak made and they seem to work well. I dont really have a good point of comparison, but they aren’t super loud and are plenty strong. Only minor complaint I have from use is the basic desk mount included is sturdy, but has trouble getting purchase on the edge of my desk because of the shape of my desk, so it’s a little more wobbly than might be ideal. That isn’t really a point against g90ak’s design, just the basic desk mount.
  7. I had been getting interested in the osr2 / sr6, but the price points / build knowledge required were high enough I wasn’t able to see myself getting into them. G90ak’s price point and upgrades from the basic osr changed that, and I’m very happy I decided to go for it. He is the reason I started posting scripts here, since I’m more excited to make multi axis scripts and have less of a hardware limitation.
1 Like
  1. Very quick to respond and answered questions very well. Asked how everything was after it arrived, and after expressing issues with my desk being thin for the desk mount, was really quick to find a solution for me.
  2. Payment was nice and simple, sent out tracking/shipping info as soon as it was shipped. Was nice about it when asked if he would do that.
  3. Prep/Setup experience was nice and smooth, the guide to setup was easy to read and covered just about anything important.
  4. Packaging was good, shipping got delayed, but not his fault.
  5. Product was good, liked the design. Seems to hold up well.
  6. The use is nice. I opted for the Flash Hobby servos which have had no issues so far.
  7. Honestly good experience overall, g90ak has been very nice and helpful throughout the whole process. Reached out to me after one of the monthly sales posts was sold out and was very kind about everything.
1 Like

Hi all,

I was able to get a custom build for March. Been here for a while and G90ak has been a staple for this community. I’ve actually been wanting to buy a OSR2+ from him when he did the first announcement thread in 2023. I would’ve had to wait longer if he didn’t start doing custom builds for the March announcement.

Here is my experience with purchasing one from G90ak:

  1. pre-sales experience: fast response time. Opted for flash hobby servos based on his recommendation. Upfront about pricing and provided quotes depending on the build I wanted.

  2. Sales experience: No hassle or issues with sending payment through paypal. Got confirmation that payment was received on his end.

  3. prep / setup - He will provide a detailed guide. Very friendly and helpful vibes with reasonable response times.

  4. packaging / shipping experience: This was my biggest worry since shipping to where I stay is hit or miss (syncbot couldnt ship to where I stay). I got lucky that I was able to get domestic shipping and it came a day early. The box he used is very durable (the box toydemon sent had a hole that showed what I ordered inside). packaging for item was sturdy, I had no worries of damages once I saw how he packed it.

  5. Product quality: Got custom build but didn’t care much for the design. It’s a neutral finish but build quality is amazing. No cracks or scratches upon arrival.

  6. Use experience: Using Flash hobby servos as mentioned above. Setup can be tedious but very worth it. It’s so worth it that I never went back to my hands-free setup on the handy. Scripts that had fast strokes are actually enjoyable now compared to the handy. The slow bj scripts are amazing with the right sleeve. Once I’m able to do a hands-free VR setup lying down, then it’s game over and my bloodline ends with me.

  7. Some thoughts:
    -make sure to have right power supply ready. g90ak was helpful in pointing me in the right direction

-being tech savvy isn’t a requirement for owning a osr2+. Just knowing how to search on forums is all you need. g90ak was always there to help but I was able to figure things out by searching the forums

-sleeves matter. I initially only had the handy sleeve og and once I got onaholes, it is addicting.

-another selling point was access to g90ak scripts. :grin:

TL;DR
OSR2+ is a huge upgrade from the handy. Setup is tedious but worth it. g90ak was very helpful and still gave tips on setup after receiving item. Would purchase from again (probably will for adapters).

Once we get an AI similar to the movie “Her (2013)” paired with VAM and right sleeve, then humanity is doomed. :partying_face:

1 Like
1 Like

I’ve purchased an OSR2+ from G90ak way back in February. For a variety of reasons (including delays on the power supply shipment which were entirely my fault), I’ve only been able to test it out recently.

  1. Pre-purchase: G90ak is quick to respond and communicative. He was very helpful with exploring shipping options and designs, provided exact quotas and photos of the product - even an in-progress video of an addon being printed.

  2. Sales: Very professional. The payment was quick and simple, the package was sent fast, and shipping info was provided as soon as it was available.

  3. Prep/setup: You’ll get instructions on the basics of the device, and how to set it up. The instruction are clear, easy to follow, and explain everything you need to get started. If you do get stuck or want more info, you can just ask.

  4. Packaging/Shipping: Since I’m in EU, shipping was going to be expensive, at no fault of the seller. After checking out other options, I concluded that this was still the best deal at the time.
    The shipment was sent quickly, and it arrived surprisingly fast, in about two weeks. No issues with customs, no extra fees, no delays.
    The packaging was very solid. The courier couldn’t damage it if they tried to, and the device arrived clean, shiny, with no damage or defects. I’ve received high-end CPUs in more fragile boxes.

  5. Product quality: Top notch. What initially interested me was the visual presentation, and it looks even better in-person. The surface is shiny and smooth, and the wires are neatly organized. The desk mount being included is a great bonus, and it even has proper anti-slip stickers. My desk was a bit thin for the mount, but I solved it by adding some padding, and it worked out perfectly fine. Replacing the adapters is also very simple and quick.

  6. I went with the default servos. Noticeably louder than the Handy, but that’s a given. They still move smooth, and fast. Even single-axis scripts are better than the Handy, and the availability of different adapter options makes it a very flexible device.

  7. Highly recommended. G90ak is a pleasure to do business with, the OSR2+ is a great device, and the pricing is very good. It’s a solid upgrade to the Handy, and a great entry point into multi-axis devices. The only regret I have is that I didn’t future-proof enough and get more adapters.

2 Likes

Short Experience of my purchase Used snips from original post to keep in order.

“* Pre-sales experience - responsiveness, clarity of communication, flexibility”

Response was very fast and extremely clear in what you are ordering and flexibility before he starts the build process.

“* Sales experience - ease of payment/transaction, clarity of tracking/shipping info”

Very easy payment method affordable product and shipping. Tracking information was provided immediately

“* Prep/setup experience - information provided, user/setup guide feedback”

User guide is provided to setup correctly and make sure everything is in working order. Very detailed

"* Packaging/Shipping experience - how was the item delivered/packaged, speed of shipping "

Shipping was super fast and packed very well in a discreet packing heavily protected from the throwing of shipping companies.

“* Product quality - print quality, build quality, attention to detail”
Seems like a solid built, Looks professionally built and detailed as described in the order process.

“* Use experience - how was the actual use experience - be sure and note which servos you utilized”
Quiet servos ordered and seems about on par with handy device maybe a little quieter. Few adapters ordered and everything seems to work as it should and super easy to swap out.

“* Anything else!”
The follow through to make sure the customer is happy and amount of detailed work going into this I will definitely be a returning customer for any other purchases needed. Keep up the good work G90ak.

1 Like

Coming from VaM, I knew about the OSR2 for a while before finding eroscripts. I just didn’t have the time to start another project and wasn’t sure about building it so I eventually went for a Keon instead. After a few weeks with it, I started looking at prebuilt OSR2’s and noticed g90ak was selling a few built units per month. After a few more weeks I happened to check for any running sales and snagged the all white “Clorox” at the base configuration with adapters.

g90ak was very easy to talk to and responded relatively quickly to my questions. The whole process went pretty smoothly. I was up front with him about being locked out of my PayPal account but since he accepts Venmo, it was just as easy.

I got to reading the provided ppt documentation which, after setting up, was thorough enough in my opinion. It was missing the receiver swapping tutorial but it’s easy to see which screws attach so it wasn’t a problem. I did have to ask about the design of the ona receiver while it was in transit since it was missing in the main thread and docs but g90ak quickly sent the diagram and let me know I’d be need my own straps.

The shipment was very quick (to California) and I immediately swapped to the onahole receiver to try out my newly received batch of onas (first timer). I did have the kiiroo feelstroker and fleshlights to try with their respective receivers but I haven’t gotten around to it yet.

It was well packaged with everything arriving with no damage. The unit itself is pretty clean and all the 3d printed parts are pretty hefty on their own (especially the adapters). The parts might seem delicate but in hand it feels solid. The included desk mount works well enough, you just gotta reach under and tighten or loosen the wing nuts.

As for actually using the thing, I’ve only used it a couple of times but it’s gonna be a learning experience lol. The straps seem to hold the ona well enough in the receiver without being too tight. I do need to do some fine tuning on the settings and I think once it’s dialed in I’ll have a better time. This is not the builder’s fault, it’s just the nature of the device. Since I have the standard servos I’m also self conscious about how loud they are since I’m no longer living alone lol. I should’ve went with the flash hobby servos in the first place as they’re already in my Amazon cart… but I’ll definitely give it some more time before upgrading. I’d say they’re loud enough to be potentially distracting if you’re not wearing headphones.

Overall I think if you’re looking to buy an OSR2+ and don’t want to build your own you can’t go wrong with any of g90ak’s work. Exclusive scripts are even included as an added bonus. I just wish I had gone straight to him instead of trying out the Keon first, for practically the same price.

I would definitely buy from G90ak again and I’ll definitely be watching to see what’s released next, whether it’s more hardware or more great scripts.

1 Like

In short, PHENOMENAL!

1 Like

I purchased the Orange Creamcicle version from the June 1 drop and have been thoroughly impressed not only by the build quality but also g90ak’s support. For anyone looking to get into haptics or multi-axis, there isn’t a better deal available.

  1. Pre-sales experience - Easy to understand what you get with the OSR2+ - limited drop system makes it difficult to appreciate the different models before you dibs one but overall reasonable for limited quantity drops

  2. Sales experience - quick and easy, no trouble paying or adding adapters - tracking information was excellent

  3. Prep/setup experience - information was thorough, hard to fully digest until I had the unit in hand but once I did, initial setup was a breeze

  4. Packaging/Shipping experience - well packed - creative use of boxes, shipped quickly

  5. Product quality - excellent print quality, lines are straight, colors are fantastic, screws are well set, and the device feels better quality than the handy or fleshlight launch do

  6. Use experience - Quiet servos make it about as loud as a handy, which seems about as good as it’ll get. The fleshlight ring has the typical mounting issues with all fleshlight products, where it very much depends on a friction fit with the case to prevent it from unlatching during use. I see this as a limitation of the mechanism, rather than the OSR2+. Swapping adapters is easy and intuitive.

  7. Anything else - I bricked my OSR2+ by flashing the SLR firmware to it without much investigation. g90ak took the time to help me restore it to original settings and it’s as good as new. I could not be more satisfied with his support and dedication to the community.

1 Like

Overall, I can’t say enough good things about working with @g90ak! I will probably write up a more in-depth review/summary of my initial experience with the OSR2+, but for this I’ll focus on the purchase process.

  • Pre-sales experience - When I finally had the opportunity to purchase a unit it was in between drops. Rather than wait until the next drop I sent a message asking if he had the time to make another unit outside of his drop window. He replied back that day stating that he would be able to and provided me a list of options such as colors, textures, and servo type. To keep it simple I looked at his previous units and asked if he could recreate it. He gave me a price and timeline and ensured that we were both on the same page. Communication was clear, prompt and consistent.

  • Sales experience - Payment was simple using Venmo or Paypal. Once payment was made, he started printing the parts. He also messaged me a picture of the parts once they were printed. Once the unit was complete, I was sent a picture of the completed product with a standard USPS tracking number. It’s as simple as it gets.

  • Prep/setup experience - Immediately after payment I was sent two links. The first was a link featuring his exclusive scripts. The second was an exclusive user guide that he created. The guide was clear and laid everything out step by step. Receiving the guide prior to shipment allowed me to ensure that my all software was pre-installed and configured before I received my unit. This created an almost plug and play experience. His guide is another one of those above and beyond things that he doesn’t have to do but sets him apart.

  • Packaging/Shipping experience - The unit was shipped priority mail via USPS (1-3 business days). It came a day late because of my mail carrier. It spent a whole day as showing “out for delivery”. This obviously something out of either of our hands. Packaging was discrete and effective. Everything arrived intact and my neighbors didn’t see that I got a “MegaJack 3000”.


  • Product quality - You guys have seen the man’s work it’s amazing. This does not feel like something that is cheap plastic. It seems rugged and long lasting. Given the expert craftsmanship it is evident that g90ak enjoys making these





  • Use experience - The unit is responsive and easy to use/set-up. I used the device in three different ways. The first way is with 2D videos using MPV routed into MFP. The second is with VR videos watching on a Quest 2. I am hosting my collection with XBVR and watching with Herespere, then connecting to Herespere with MFP. The third way is connecting OFS to MFP for immediate script feedback. I have the stock servos which get the job done… but they are loud! When standing outside of the room with the door closed the unit is clearly audible, as if in the room. If in a non-adjoining room with both doors closed, I was only able to faintly hear the loudest sounds. I definitely wish that I would have paid for the quiet servos. I was also curious how loud the stock servos were.

The only issue that I initially had was my desk was too thin for the provided desk mount. G90ak offered to send me a modified clamp piece for thinner desks. I opted to just do a slight modification to my desk.

I highly recommend purchasing an OSR2+ if you are in the market and want an amazing product for a good price.

1 Like

I’ve had my OSR+2 from @g90ak for about 2 weeks… and what an amazing 2 weeks lol.

I wont rehash what others have said here. I recommend the upgrade to the quite servo’s (which I did). This makes it non audible in room next door as long as your walls aren’t too thin.

My only complaint is that I find myself having to tighten the screws on this very frequently. @g90ak provided a maintenance guide to explain how to get to the screws to tighten them, but I basically include this “tighten all the screws” routine after every use so it is ready to go on the next use. Frankly I’m getting pretty efficient with disassembling/tightening/reassembling so it only takes a few minutes. Maybe I’m abusive in how I use it :wink: :japanese_ogre:

I suggest you get an ifixit kit or something so you have good tools to manage the screws.

Every time I’ve had any question or thing I needed advice with @g90ak has gotten back to me in less than 12 hours with detailed answers and advice. Could not be happier with the customer service here!

I’d love it if the screws-get-loose problem was somehow solvable. That’s my only real wish here.

Absolutely fantastic 9/10 rating!

1 Like

Got my OSR2+ from g90ak in the last drop. Great experience from buying to owning/using.

  1. Pre-sales experience - g90ak is incredibly clear and concise from the very first message, not once was I confused on what he was asking of me nor did I ever feel pressured into anything at all.
  2. Sales experience - All of the above makes the purchase incredibly easy. Everything is laid out for you by g90ak which makes the whole purchase a breeze. Upon confirmation of purchase g90ak had a tracking number for shipping ready for me in no time at all.
  3. Prep/setup experience - With the purchase g90ak provides a very detailed step-by-step guide to setting up and tuning your OSR2+. I’d say 95% of the questions I’ve had were answered either in the main guide or in one of the other guides provided. The other 5% were provided through simple google. Like a few people said here already, the provided desk mount can be tricky if you have a thin desk like most of my desk, think around 1 inch or so thick. Luckily part of my desk get up to 2-3 inches thick which works with the mount.
  4. Packaging/Shipping experience - Package arrived incredibly quickly. Within I think maybe 2-3 business days. Everything was bundled up with the utmost care and from the packing I would say you wouldn’t ever need to be scared of an OSR2+ coming damaged on arrival from g90ak (Though I’m confident he would be a breeze to work with if it did.)
  5. Product quality - I mean this thing is a beauty. I got the Carbon Ninja from this last drop. While it was the least colorful of the set, even still it looks great. Everything on this thing screams premium even though it is obviously 3D printed, you can barely tell. The carbon fiber design is a nice touch and the whole machine just feels good. It really shows how much g90ak puts into each one to make sure he isn’t just sending out something that “just works”, but going the extra mile.
  6. Use experience - Coming from using the handy exclusively, you really don’t realize how much better you can have it till you do. This thing rocks, with the added adapters from g90ak I can utilize ever toy I own, the osr2 has no trouble moving anything from my old handy sleeves, to flesh lights to even pretty big onaholes. And with the “silent” servos, the noise isn’t too bad, though I will say it is still pretty loud, I 100% recommend the silent servos if you can afford it.
  7. Anything else! - Overall a pleasure to work with, and… well a pleasure to use :smiling_imp:
1 Like

I’ve had my OSR2+ for a couple of weeks now and compared to the handy I’ve been impressed.

  1. Pre-sales experience - Really quick responses, was upfront about how much it wouuld cost for international shipping (to the uk) when I asked before the drop.

  2. Sales experience - Payment was simple and managed to get it confirmed within the same day.

  3. Prep/setup experience - The premade guides were really easy to follow and made setup a breeze to go through. The only issue I had was some axis movement being inverted but g90ak was really quick to respond and offer some fixes for that which worked great.

  4. Packaging/Shipping experience - Shipping came with tracking and managed to arrive in a few days which was much quicker than expected. The parcel was slightly smushed which is really a shipping handling fault which I half expected but because of the pretty solid packaging by g90ak, nothing was broken inside.

  5. Product Quality - The print quality is really good, making it really sturdy to handle when it came to attaching the mount and doing maintenance. In terms of appearance it was just like advertised apart from some small wisps of plastic that were easily removed by just brushing them away with my hand.

  6. I opted for a quiet unit which came with the flash hobby M45CHW servos. Coming from the handy it was a night and day difference, it is much smoother and faster all while being pretty quiet (Personally I would say they still manage to be quieter than the handy). I found longer sessions to be much less of a worry thanks to the heatsinks keeping the servos pretty cool.

  7. If you’re thinking of getting an OSR2+ as an upgrade to the handy I can highly recommend getting one from g90ak. They’re well worth the price and the attention to detail with thoughtful touches like metal inserts are a breath of fresh air.

1 Like

Pre-sales experience - Lots of information in the main post, really liked the author’s approach with component descriptions and technical details on fabrication. Quick response and shipping estimation, overall 10/10.

Sales experience - Paypal, fast and easy

Prep/setup experience - detailed instructions, not plug-and-play, but very close to it

Packaging/Shipping experience - I had shipping to europe, expensive (but big thanks to g90ak for helping) but relatively fast and without problems

Product quality - 11/10, awesome quality.

Use experience - So far only 1 script is tested from g90ak’s collection. It’s impressive, especially when you remove speed limit

Exclusive scripts - yes, 100% yes.

2 Likes
  • Pre-sales experience - You can get information on everything in the main thread or by just asking him via a PM. He’s incredibly detail oriented and at no point was anything uncertain.

  • Sales experience - Used Paypal and he was very quick to confirm the payment. He even went out of his way to send it to Germany and researched how to best declare everything for customs to make it go as smooth a possible.

  • Prep/setup experience - I was prepared for a day long setup and testing period, but using the vast amount of tips and tutorials he provides, I had everything up and running in about an hour.

  • Packaging/Shipping experience - He did everything in his power to ship the package as fast as possible. He even went out of his way to help me solve numerous problems with the local customs office and UPS’ everlasting quest to make me hate them. Even when the delivery person chucked the package out of his car and against my front door, nothing was damaged because of the double layered packaging. Did I mention that UPS held the package hostage for over a week while refusing to tell me why? F*ck UPS. @g90ak is a saint for helping me through that.

  • Product quality - I choose the silent servos and am more than happy. While they are somewhat louder than a Handy it wasn’t nearly as loud as I expected. The regular ones supposedly scream like the devil though. During testing I figured out setting a speed limit to about 85-90% noticable reduced the noise as well. The overall build quality is incredible and led to the customs office to disagree with the product value attached to the package. His attention to detail makes me believe that there is no other creator that can match his standards. The whole thing should probably cost twice as much, if you compare it to self build or cheap build options.

  • Use experience - It’s a clear 10/10. I’ve bought several adapters as well and tried the unit with the Maiki/Onahole adapter instead of the Fleshlight one. There is absolutely no problem so far and even a comparably heavier Maiki gets thrown around like a feather.

  • Exclusive scripts - I have yet to try them because I have not had the chance for many rounds with the osr2+. They look quite good though and I’ll definitely try them.

  • Anything else - Please support this man in his quest to create the perfect toy. You won’t regret it. Oh, and he’s got great taste when it comes to colors. His builds look really nice as well.

1 Like
  • Pre-sales experience - I already owned a OSR2+ so I knew what I was expecting. All information is there. Found some Youtube videos too in the documentation which was a big help getting to know the device better.
  • Sales experience - Quick and easy. Just give your address so your shipping costs can get calculated. Then you get a PayPal link and in my case, it was send around a day later. It took 6 days to arrive.
  • Prep/setup experience - The provided documentation was very clear and contained some things I didn’t know, even though I already own an OSR2+.
  • Packaging/Shipping experience - The package came in undamaged and was very neatly padded. 10/10
  • Product quality - This is what I’m most impressed by. The build quality is insanely good! The improvements are all fantastic and it’s put together really well. My first prebuild had tons of loose screws and one of the arms was mounted upside down lol. Even when I fixed it I always had a feeling it wasn’t aligned properly. I can’t stress enough how insanely good the build quality is!
  • Use experience - After using it around 3 times I noticed the screw that holds the left arm to the fleshlight holder was coming loose. I didn’t check if they were all good when I got it so it could be because of transportation or just bad luck. I simply needed to retighten it and it hasn’t gotten loose since. In fact I regularly check them all now to be safe and not one has come loose.
  • Exclusive scripts - I only tried a couple of scripts for the CGI videos. They were good, but some of them had a pretty long stroke length which didn’t really match with the video imo. I’m a real sucker for realism though and quite picky so it’s probably fine for 99% of people. Of course you can always limit the stroke length and or speed yourself.
  • Anything else - It’s probably not needed by 90% of people, but maybe you could add the zero values of the servos you set? Would be handy if you want to upgrade the firmware because from what I understand the values are not read when you access the firmware page. I could be wrong though.
1 Like