Hey everyone. I was wanting to post about this for some time now but I kept putting it off. As you know I script a lot of edging scenes and one of my favorite styles of videos to scripts involve handjobs. For the longest time I would use the open ended fleshlight quick shots and open ended handy stroker, but I really wanted something more shallow that felt like two fingers, the thumb and pointer, that would allow for more delayed orgasms. A while back I had purchased some masturbation rings called Youcups. I was able to get a set of 3 different ring that could interlock and be modular. The plastic rings were not great by themselves but the texture and depth of each sleeve were great. I ended up taking an old fleshlight tube and drill some holes in its base and was able to ziptie the inner sheath of the Youcup to create what you see below. I did have to get creative with the tape to hold down the zipties. I ended up using this type of sleeve for the entire month of November for NNN and many times more after. This type of sleeve feels fantastic as it is very precise to a certain area of your member and once you climax it doesn’t hit the head as often as longer strokers do so it tends to allow for less of that ruined orgasm feeling. The main reason I am bringing this to the attention to others is that I would really like to see something like this produced by the bigger companies. I have many thoughts on how this could be made better and how different attachments could be made for more stimulation. I was initially going to try and attach some soft makeup brushes inside that would stroke along the head if you made deep penetration but would only tease the tip at times. These of course would need to be detachable for cleaning purposes. One unexpected plus to creating this with zipties was that if you dont tape down the longer ties they tend to shift after a while of use and the blunted pointy end can be made to act like fingernails that drag along your balls on an upstroke. So if anyone is up for the task of streamlining this and make it 3D printable, please do. Thanks for reading.
The concept of being able to stack a number of variable rings in a Fleshlight-compatible case rather then use a predefined sleeve seems interesting
Idk about 3d printable on the fleshy bit, but you could always use a body safe platimun cure 2 part silicone and use a 3d printed mold to pour that into. I’ve found making and using such molds incredubly easy and would be happy to correspond about the process. Printing the outer components would also be relatively straight forward. Would be happy to help if you can share more details about the items to be produced.
I suppose it would be pretty simple to just make a 3D printable case for the youcup rings that has 6 posts inside to hold the sleeves and then create dividers so you can have one ring then a spacer then another ring. Unfortunately I cannot find the youcups available online anywhere. I recall buying them for cheap on ali express. I did make this mock drawing the other day.
Yeah without the specifications on the fleshy but, I worry about making something that doesn’t really meet expectations. I could fabricate the whole thing if I just knew dimensions and approximate internal textures. And you want this to mostly be compatible with the handy specifically? It would be easier to make it to fleshlight standards so its iniversal for all machines (but obviously shorter given the intended use case.
I’ll model and render something today along those lines and maybe will have time to post it as well.
Please do not put much time into this, as I know your time is probably much more important. This is purely a science experiment for me in the works lol. However, if I was able to get more youcups (currently I am unable to find them purchasable anywhere) that is where I would start as the sleeves for these have 6 posts to hold them in place. Ideally If someone were to remove them from their housings they could be used similarly into a 3d printed case with 6 posts that were longer so you could stack, say 3 and slide them into the housing. You could also slide one on, add a series of 6 spacers to keep the top one in place, add a bottom ring and them have some sort of screw on base plate so the stroker would hit the tip and the base which sounds really fun. The biggest problem I have with the stroker I made is that the Fleshlight cases bottleneck too early upon entering. This is purely based on the users size, but there are a few times upon penetration that your head may hit the inside of the casing on the sides that were originally meant to be protected by a full length fleshlight. This could be easily solved by just making a fleshlight case that is just longer at the biggest opening I suppose. Thanks for listening to me rant and taking an interest. I do not do 3D printing myself, I usually buy from people who do printing from the community so I sometimes do not know what I am talking about.
Also, 1 thing i would recommend is making the first test versions for the OSR. This can already have a handy adapter, and is a lot safer to use.
A downside is that it can carry more weight, so these things might not always be testable here, but that sort of testing doesnt need your dick in it. Which if you are realy going for it, is a quite important test (too tight and therefor causing resistance can be a problem, and one the OSR can at least already identity).
And in the worst case if it doesnt work for the handy, it at least does still work for an OSR. Which might still be worth the project on its own then,
I like the concept, but I can’t find the product either. Any ideas for maybe something similar off Amazon? I can design and 3D print something but it would make more sense to work with something easier for others to find and use. Also to pull proper measurements from when creating the 3D model.
I did find them on ali express New Male Masturbator Cool Ring for Men Collar Aircraft Cup Aldult Sex Toys Shop Penis Trainer Lasting Masturbation - AliExpress 66
Also
Here
Also, I took a photo of what you can expect the insides of this ring to look like. They are not the easiest thing to rip apart to remove the sleeve.
Can you add a fleshlight for scale?
I.e.
- Do the white parts fin into fl casing?
- How well do non white parts fit?
- If you stack 3 non white parts how do they fit?
- If you stack 6?
Sad there are only 3 parts, a lego Fleshlight with more purts would bw funnier
Unfortunately I can’t give you an accurate depiction of the inner sleeve and how many you can stuff inside of a traditional fleshlight case, but I do believe it can be done, but I think it would crimp the sleeve just a little. Here are some reference photos of the case alongside a fleshlight case below. The white parts do not fit inside the case, it is about the same size as a case. The white parts do fit inside the cap of a fleshlight case. You could maybe stack 2 sleeves inside of a fleshlight case, so any casing 3d printed would need to be taller and wider where as a fleshlight case gets too narrow too quickly. I hope this helps.
Thanks Teasey, I ordered a set to make some 3D printed adapters when they arrive. I’m thinking of a few variations where it can adapt to a fleshlight case with and without the gear shaped plastic attached.
If you are able to get something working, please let us know. Also, be careful should you try and pry them apart to remove the sleeves. It took some time with a screwdriver, so a dremel tool may be a better choice. Feel free to reach out if you want to discuss the project some more, I would love to see the process.
Okay so I designed a mold and casing so you can essentially make your own. I’m going to post them to my cults page and link here. Just been struggling to find time to get the post up, but soon.
And I say that you don’t print stuff yourself, but you could get someone to make the prints. I’d recommend doing the mold pour yourself though - definitely worth it to save on that process.