I bought a prebuilt Sr6 about a year ago and one of the servos went out. How do I dismantle the outer case to access and replace the servo. Pictures or guides are appreciated.
Unfortunately I can’t provide pics but it should be pretty straight forward. The cover should be held in with 4 torx screws then inside should have another 4-6 torx screws that hold the servos in place. My suggestion is to be careful when removing the cover as well as servos. So the connections don’t pull out of the pins from the esp. Each build may be different depending on the maker. Also plug in the unit before attaching the arms to the servo because the servo will spin until it’s in the home position. Hope this helps.
This topic was automatically closed 90 days after the last reply. New replies are no longer allowed.