I really love a warm sleeve and find that the old hot water or rod trick wears off too fast for my liking. I noticed that the OSR2+ and SR6 at https://yourhobbiescustomized.com/ have a heating module if you buy the preassembled versions, but the heating is not available on its own. I really only want a linear device + heating (and something i can lay down in bed with) and i want to know know where i could get the module for if i end up getting an SR6 or OSR2+. I don’t have a 3D printer to make my own toys so ill probably need to get a preasembled at least base version, but im experienced with soldering and electrics to hook it all up once i get all the things i need.
You can buy just the heated case. But its designed for the OSR and SR6 because it needs to plug into the boards. So theoretically speaking if you have a way of powering it, you can just strap it to a Handy.
There was this. Though you could get a similar effect by just wrapping a sleeve in a silicone warming pad and shoving it in a case.
You can buy an unknown brand stroker from amazon and just strap that in. Thats at your own risk because those are less known brands/devices.
Other than that, warm the lube as well if you weren’t already, or try insulating the case/sleeve to keep temp.
Edit: Apparently some people use electric handwarmers that spas use or rechargeable heated socks.
I’ve been looking for something like this for a long time. I use a quick shot from Fleshlight and one of the most annoying things is because it’s open-ended it dropped some temperature really quickly. I try to counterbalance it with a Lube warmer but after a few minutes that also starts going cold and I ended up putting too much Lube just to keep it warm.
If anybody has any suggestions I’d love to hear it!