SR6 position is broken

[sleepy4567]

Hello

My SR6 is completly going insane
The position at rest is nonsense and because of this at work is a mess.
I don’t know what happen and how to fix this ( except by buying a new one )
The pics shown only one of the many broken resting position.
He exclusevely going in the direction you see in the pics.
Same at work, on every linear script, keeping the same point zero position.
Did someone have a idea for repair it.
I have it only for 1 month ^^

Thanks for all and your help

[Ratattack15]

Do any of the servo arms not move at all or feel stiff compared to any of the other ones? As to me it looks like the one or more servos are dead.
Especially if it was working fine prior to this starting.

As it’s been maybe an month at most since you purchased it I would get in contact with whom you purchased it from since I believe servo’s warranty periods are 3 months if you get it from Amazon. (or at least that’s what I’ve seen for mine)

I posted more detail about checking the servo and slightly about replacing them here:

Need help with osr-2

That’s not good in my view that the maker hasn’t responded to you after taking your money. That’s something you have to decide on with how you’ll proceed/deal with it all. However it is good that you’ve actually been more than willing to open it up by doing so already. As well I hope at least that you purchased it with the knowledge that you will have to do servo replacements in the future which requires fiddling with the insides and some specific tools. As you don’t know much about text stuff…

If it isn’t the servo’s then you might have to re-flash the firmware which someone else will have to tell you how to if you can’t find it out yourself.

[sleepy4567]

Hy thanks for you answer

Got it from Aliexpress
Don’t i have any warranty ( I think )

And yes, I dumb enough to have buy it without thinking about any future maintenance ^^

But lucky for me, I’m not so dumb

I already did some test, the up right servo don’t seem to not move.
So one dead servo

Take photo of everything to remember the right way to mount it after finishing
Open it
Extract the right servo
And commande a servo FT5530M and other spare, just in case

Shame it already broke
With the absence of knownledge I have with this equipement I prefer asking just in case.
But I find the problem ^^

Of course is always a pleasure to receive some help

[Howard150812]

Tempest’ built guide for the SR6 on Patreon might be helpful if you run into issues, but Im pretty sure you got it from Funosr and they might have changed some internal parts. I would still try to reach out to them, they like to use discord to resolve issues if possible.