I am assuming your models would be compatible with adding the twist module as an aftermarket mod? This is out of my wheel house of knowledge since i just buy fully done models.
Like I don’t know if this would require programming in to add twist to the board or w/e. The only thing i could see is unbolt old receiver, replace with new one and find wherever the wires go.
Honestly if I was doing it all over again, I would have bitten the bullet and gotten a OSR2+ from @g90ak on day one (even more of a no brainer if you based in the US). Everything else is just beating around the bush at the end of the day. I started with the original FUNSR1, it broke after about 3 months. Now have an OSR2+ and honestly regret wasting money and time considering anything else.
People have their own opinions on the twist. It is nice, but most of the time I have to set it to about 25% of its full range anyway to avoid twisting my dick off with most scripts. If I was doing it again I probably wouldn’t bother with it.
Yes, apart from installing M3 heat inserts to the twist receiver (will take less than 5 min if you have a soldering iron), it’s fully compatible. My PCB even has a specific output/socket for twist, so you don’t need to splice any wires, you just plug it in.
Like you, I’ve had multiple devices…the original Launch, Keon, Handy, etc. The Handy is great but your pretty limited with the sleeves. I tried to mod it to accommodate a Fleshlight sleeve, which worked, but it killed the accuracy and speed. The Launch, Keon, etc all are just ok.
I just got the OSR2+ from g90ak and my mind was blown. Wish I hopped on this earlier but I was worried that a DIY stroker would feel DIY. This isn’t the case with what I received. I can now use Fleshlight sleeves with great speed, accuracy, extra motion, and hands free. I celebrated by ordering 4 more sleeves + 2 extra due to the Black Friday deal lol.
oh i assumed the twist model off mosaic’s site would just be ready for that. more things to consider i suppose.
edit: soldering iron and inserts are cheap, so this shouldnt be a concern i suppose