So I picked up a FUNSR1 2.0 but wasn’t a fan of the available handsfree options. Coming from the Launch, I was a fan of how you could just wrap a sheet around it and it was Handsfree. I’d just picked up a 3d printer, figured I’d see if I could come up with something that could replicate the flexibility offered by the Launch.
This is for use with the twist module, I assume the hole will be in the wrong place for the other option.
I’m new to 3d printing and CAD so this is unlikely to be optimal, but it’s working for me so figured I’d share.
All you need to do is wrap a sheet around the back/top and then around your body and you can use it anywhere.
It uses the bolts and nuts that came with the SR1 2.0. I added a few washers, not sure if they’re required.
The case of the SR1 drops out the bottom because otherwise you lose about an inch of penetration. I haven’t experienced any issues with that, as it’s usually between my legs.
As a bonus, I also created this little torture device. I was impressed by the twist, but couldn’t really feel what was happening, so just tried to enhance that sensation. It replaces the removeable ring. It’s definitely interesting, may increase the intensity too much.
Bought a funsr1 2.0 too, and was also unsatisfied with the handheld option it came with and found your hands free design for it. I was wondering if you’ve thought about improving on the design at all? Also can you explain what the fleshlight cap insert is and what it does?
Yeah I changed the design a bit, stripped out everything I found unnecessary. Also added some loops to the side so I can use straps to keep it in place instead of a sheet.
The insert didn’t really do much for me, i tried all sorts of designs but they only make the experience worse. It was designed to essentially add tightness and texture to existing fleshlights.
Probably still not perfect, but works well enough. I use 2 straps, both run through the the loops and round the back of the machine. Then one goes round behind me and another goes under my butt. The second one isn’t really necessary in most positions, it just stops the front from lifting. I got some strapping from amazon and 3d printed some clips.