Nvm ignore that, it makes no sense being in cm with those sizes xD
Thanks for your reply man! I’m supposed to be getting my handy 2 later this month since I was part of the early bird special so I have no idea that this was even an option.
Is this something I’m going to have to do every time I turn on the handy or is it I can set it in the app to be this way and I’m good to go? I think I honestly still prefer to have a amount due to the buttons are located I’m right-handed so it’s going to be really awkward to have to reach over to change settings.
It’s a one time thing.
1 Like
Thanks for the info, friend! From the research I’ve done, it seems like the actual stroke mechanism isn’t strictly top-to-bottom, it’s slightly slanted, with more movement toward the top than the bottom. I’ve heard that switching the orientation could be an issue because of that.
That said, I’ll wait until I get my Handy 2 and see how it fits. If it doesn’t work well, I’ll just make a custom holder. I’m pretty good at 3D modeling, so I’ll design a hands-free cup for the Handy 2 — and of course, I’ll share it for free with anyone who wants it.
5 Likes
Very detailed review, thank you
1 Like
Agreed, I see no point on upgrading
1 Like
Thank you for the review, as one of the Early Bird Backers due to get one in November, i dont really know what im getting myself into. But thankfully. Its clear that it can hold up very well. And im thankful to say that this is a worthwhile review.
1 Like
I also want to mention—if anyone already has their Handy 2 and is interested in a hands-free cup for it, I’d love to get started on the design early. If you can provide the dimensions (including any curvature), I can begin modeling it right away and get it out sooner.
Otherwise, I’ll have to wait until mine arrives next month since I’m an early bird backer. But if you can share the measurements—or even better, a 3D model—I can fast-track the process and get something ready for everyone much sooner.
1 Like
You are welcome and thank you 
You are welcome!
The Handy 2 definitely does hold up. Since I wrote this review, I had more uses and I can say it is a pretty damn good device. The wireless experience is such a big qol change and the better motor really shows. Overclock mode is also a lot of fun. I have a great time with the Handy 2 and everybody who will get theirs soon, you will have a great time as well.
Amazing review! Would it be possible to see a video of the handy at its overclocked speed? I’m curious at how fast it will look
1 Like
Thank you very much!
Yes, sure I can make a video of the Handy 2 Pro in overclock mode. I will be able to make the video on the weekend. I’ll update, once done.
2 Likes
Here’s a video of the max speed comparison: Handy 1 vs Handy 2 vs Handy 2 Pro overclocked
And minimum speed: Handy 1 (same as Handy 2) vs Handy 2 Pro
(not my videos btw)
2 Likes
Hello everybody!
I have a quick update to make. The Handy team, to be specific @handyAlexander, messaged me shortly after I released this review. He was so kind and offered me prototypes of the new extenders, in order to generate more space between the device and slider. Yesterday I received them.
He was also so kind and sent me the double strap system already. There are two types of them.
From left to right:
- Extender, to generate more space between device and slider
- A new sleeve holder, which is much thicker than the original one, automatically generates more space between device and slider
- Front cap of the double strap system
- Holder of the double strap system, with magnet in the middle
- Holder of the double strap system, with magnet either top or down
They also sent me two new straps.
Top strap is the standard strap. The two other straps are the new straps. The standard strap is ~24 cm long, the new straps are ~28cm long, making them 4 cm longer. This is much better and will allow a more secure strapping of sleeves / Onaholes.
Quick comparison between the old holder (left) and the new slider with extension (right). Much better! You can already see that a sleeve will probably not touch the device anymore with the new system. Big improvement!
I will test it over the weekend. I will test the extender with the single holder, as well as the extender together with the double strap system + Onahole use. Once I tested everything, I will update the review.
I will add the update in the original post under point “22 - Updates”.
Big thanks to the Handy team @handyAlexander for sending me these and for taking my feedback so well and immediately reacting to it. That shows how dedicated the Handy team and how close they are to our community.
7 Likes
The mounting holes are the same as handy 1!!! When i get paid next check im ordering myself one before the $400 price tag. I have a 3d printed fleshlight adapter for handy 1 and it works so well. I have collected 12 fleshlights since real touch scripts days.
Overwatch kings row is probably the only video where the handy 1 overheats due to not keeping up with the script. There are a couple extreme fap hero videos and some noodledude videos that cant keep up with endurance. I have tried the handy1 on extreme hot sunny days and only use my handy at night time due to also overheating. I cant wait to get the pro version and try overwatch kings row again with no over heating!! Nice review! My handy one will be open to using the quickshot now or just the handy 2 pro sleeve!
1 Like
Hello everybody!
As I said, I updated the review. There is no score adaption yet, since I need more time to fully test and to make sure Onaholes are useable for now. BUT → it looks very promising!
I post the update right here, but it can also be found in the original post above under “22. Updates.”
Update – 22.10.2025
Shortly after publishing my review, @handyAlexander from the Handy team reached out to me and offered to send a set of 3D-printed prototype adapters — designed to solve the problem of the slider being too close to the device.
I received the prototypes a few days ago, and while these are not final versions, they already make a huge difference. Here’s what I got (from left to right):
- Extender → creates more space between device and slider
- New sleeve holder → thicker than the original, automatically increasing the distance
- Front cap for the upcoming double-strap system
- Holder of the double-strap system (with centered magnet)
- Holder of the double-strap system (with magnet offset at top or bottom)
Something important to consider:
They also sent me two new straps.
Top strap = standard one (~24 cm)
Bottom two = new prototypes (~28 cm)
That’s 4 cm longer, which makes a huge difference when strapping Onaholes or sleeves — much more secure now.
Here’s a quick comparison between the old holder (left) and the new slider + extension (right).
You can already see that a sleeve or Onahole no longer collides with the device — a massive improvement!
Left → old Holder. Right → new holder + extender.
Handy True Grip Sleeve Gen 2 and Gokusai Uterus
Gokusai Uterus side view and front view.
Lewd and Seductive Maid’s Devoted Service - big Onahole.
First Impressions
- Big improvement overall — Onaholes are finally usable thanks to the double-strap system and the improved holder.
- The holder could still be slightly larger, but it works.
- Compared to the FUNSR1, the Handy 2’s new holder is smaller (see below), but still functional.
Performance Tests (so far)
- Gokusai Uterus → Works perfectly.
- Nezuko’s Double Tooth Blowjob - EU / Nezuko’s Double Tooth Blowjob - US → Works perfectly.
- Urethral Twist Otokonoko - EU / Urethral Twist Otokonoko - US → Works, but the Handy 2 sometimes shortens strokes slightly.
→ Likely because this Onahole “pushes back,” causing reduced range (see my review). The FUNSR1 doesn’t have this issue. - Lewd and Seductive Maid’s Devoted Service → Large Onahole test planned. Early test shows minor contact but no major issue.
Using the extender + new single holder now gives ~2 cm of space between slider and device (previously <0.2 cm).
No more sleeves or Onaholes rubbing against the body — except the biggest ones, which only touch slightly.
Using the extender + the new double holder, gives ~1cm of space between slider and device.
Video Showcase
Showcase of the Handy 2 Pro in motion with Gokusai Uterus and Lewd and Seductive Maid’s Devoted Service.
All videos are SFW, no explicit use.
Click, to see the videos
Uterus Gokusai Onahole - single strap.
Uterus Gokusai Onahole - double strap.
Lewd and Seductive Maid’s Devoted Service - normal speed.
Lewd and Seductive Maid’s Devoted Service - full speed.
See how the Desk Mount struggles with its position during the use of the Lewd and Seductive Maid’s Devoted Service .
Handy Desk Mount Issue
The only problem so far is with the Handy Desk Mount — it tends to slip or sag under the additional weight of heavier Onaholes.
I’ll experiment with positioning and tightening to see if this can be improved.
Final Thoughts on the Update
This is a fantastic improvement and shows once again how dedicated and community-focused the Handy team is.
Huge thanks to @handyAlexander and the team for immediately reacting to my feedback and sending these prototypes.
I’ll continue testing and update the review’s total score once I’ve had more sessions and long-term results.
For now, things are looking very promising! 
3 Likes
BTW, the extender is stackable, so you can add as much length as you want.
2 Likes
Thank you for the tip! I forgot to mention this. I quoted you and added the quote the review.
Probably a good idea to stack two of them when using bigger onaholes.
Can someone provide a video of the max speed in action at different ranges? I haven’t seen anyone upload a video showing the possibilities of the overclocked version.
I can make a video of the Handy 2 Pro at ~ 800 if that’s ok. I don’t want to overdo it with the speed ^^
I will do some this weekend and post them in the Handy Discord. I still have one at max OC without anything attached here:
This is before I regreased my Handy 2 Pro (which I’ve done thrice now, cause I use OC all the time). It’s a bit different if you maintain it well.
I’ve been exclusively using the OC mode a few times per day. Used the Handy 2 Pro over 50 times now and have lots of experience now.
Also to add to that, the Super Early Batches are certainly the prototypes now.
Tons of things changed now for the second Batch:
Changes confirmed for Batch 2
- Upgraded motor bearing quality The bearing is higher quality, reduces noise during operation,
- Refined motor assembly process The plastic blend was changed to be a more durable material. Before, during manufacturing, the plastic would shrink differently during the process and it caused some motors to be misaligned. Further changes to the precision of the lead screw installation should also reduce misalignment errors.,
- Packaging now marked with batch number Packaging now has batch number on it, for end users it changes little but this will empower us to better track the origin of the devices and troubleshoot batch related issues,
- New packaging for both Normal and Pro versions Handy 2 Pro boxes will now include the Sleeve Dryer, so the packaging was updated to accommodate this. Both Normal and Pro packaging were updated with new sizes and designs.,
- Minor plastic part adjustments for better fit and finish These changes are related to motor misalignment as mentioned above.,
- Improved magnet bonding process As users reported, the magnet on the Super Early Bird versions can fall out eventually, when the click-on is attached to the slider the plastic POM changes shape in order to keep a secure hold. The glue that we were using before would crack as this happened and by extension it would fail. We are doing LASER treatment on the plastic to improve the glue bonding. We changed the glue to POM adhesive,
- Ships with firmware v4.0.18 This should allow the Handy 2 to ship with a firmware more capable to handle the device.,
- New bootloader tested on 100 Pro and 100 Normal units This is related to QA, this will ensure that all units have all functions tested and verified before it leaves the factory.,
- Silicone sleeve slightly enlarged for improved fit The buttons height has been increased so the buttons are easier to find in the dark,
- Serial number printed on box Same principle as batch number mentioned above.,
- Enhanced PD/QC power handling This change resolves the coil whine during charge, further changes were made to increase the lifespan of the device. Another change in this point is improved accuracy on internal measurements, further improvements being tested via Firmware updates.,
- New solder paste application machine — PCB rework nearly eliminated This change fully removes the possibility of electronic hardware errors, it’s something that won’t be super obvious for the user but will streamline troubleshooting for Customer Support agents. This also now results in Higher Quality PCBs We were applying the solder paste manually which led to overflow of solder on the pads of some boards. The new machine is now automated to increase the quality of our PCBs.,
- Extended pads on PD IC for better soldering reliability Improves the thermal management of the PCB and increases the quality of the boards,
- Extra oil and grease applied before shipping,
- Increased clearance between slider and front silicone,
- Cleaner appearance
So yeah lots of things changed which is why I withheld my own review so far (not to mention to collect experience which needs a lot of for me as a scripter and checking new things out).
I can add though that I am unable to kill it. Just yesterday I ran a 1200mm/s script for 20 minutes and it didn’t even get that hot. It’s super important to grease it well. Sound levels though? Ehhh… I use ANC headphones and OC is of course louder with those speeds, but even the normal sound in my case is a bit ugly (like a printer/zipper). Won’t be here in November though which is why I didn’t contact support so far.
Also they added the new ClickOn STL files for the extender extender (after I bugged them) and the improved Fleshlight adapter:
1 Like