I recently saw that Kiiroo is selling three different accessories to keep from having to hold the Keon. Has anyone figured out a good solution(s) to use it without having to buy an accessory? Thanks in advance!
I usually put a stack of pillows/blankets under the Keon to support it while sitting up. Laying down is more difficult for me to do hands free…
I’ve seen other people say that they use a blanket wrapped around their neck and the Keon to hold it in place for a BJ-like position, but have not yet tried this myself!
my option
4 Likes
When I used to use my Keon I would just lean it between me and the edge of my desk. Adjust the chair height as necessary. I also bought one of those barbell pads to add to the edge of my desk to stop it from making noise
So here is a solution I came up with
I used a pipe clamp to get a mounting point for the Keon.
Then I got a monitor mount to mount it to any table etc.
So I have full height, and angel adjustment.
Keep in mind the Keon is heavy and the movement also stresses the pipe clamp and monitor mount so don’t cheap out on them.
3 Likes
Woodworker here, that idea of the pipe clamp seems good, going to think about adjusting it to add something wood looking to it 
thanks for the added pictures
2 Likes
That’s a great idea to use the pipe clamp! Did you use some kind of a thread adapter to mount it to that plate or just welded them together?
Just like the launch, you can use a stanley band clamp to wrap around it, then wedge the handle of that in the vice grips of a stanley multi-vice mounted to a desk or table. You’re welcome.
1 Like
Does anyone know where I can find that pipe clamp in the USA?
my guess would be a hardware store, like ACE, or another local one. home depot may very well have one as well
1 Like
The clamp that they sell for it is really good and stable. Easily attaches to a desk. You may need to fiddle with it to get the right angle. Mine is more horizontal since I can’t lower my desk as far down as I’d like and my chair won’t go high enough. The recommendations of getting an arm for it would helpful if you can’t adjust your seat or your desk height easily. I like the idea of a monitor arm but I like to put things away when I’m done and it would become very annoying have to mount and unmount a monitor arm from the desk.
Just a Set of Mount and some Clamps for Future Ideas, Maybe someone will take Inspiration from this.
Reading all these options puts into perspective how cheapass my setup is lol. For reference I use my Keon laying down in bed, with usually a cover over me for warmth (Canada is cold dangit) and to muffle a bit the sound since I live with other people and I’m worried my fan doesn’t do enough white noise.
Mats and Setup: 5-6 cheap elastics, you basically put them around the Keon roughly at the level where the side buttons are. 2 bungee cords, they hook in the the slight gap between the elastics and the buttons, and they go under you with how high/low you place them on yourself controlling how much the Keon presses into you.
The elastics stay in place with friction and if one breaks, easy enough to get more at the dollar store or whatnot. Only issue is if I need to relube but even then I don’t usually need to unhook anything, I just pause and remove the cap on the case and put a few squirts in the end of the sleeve.