The right servo arm on my osr2 is not working right, I took off the arm to see the issue and the servo is spinning without resistance any advice on how to fix it?
Likely a new servo is needed, however, it may not be receiving power, pop open the lid and check your connections. if your connections look like they are correct, what I would suggest to do is swap the servo wires from side to side, so hook the left up to where the right one is supposed to be hooked up and vice versa.
If the problem stays with the servo, the servo is faulty. if the problem moves to the other side, then the board is faulty.
1 Like
This topic was automatically closed 3 days after the last reply. New replies are no longer allowed.