Thank you very much!
Hey, just as a size reference does the Fuwatoro also fit into the twist adapter or is it too big? I checked online it seems to be 12cm in diameter, if that fits then my stuff should also fit. Pls let me know 
Yea, still having troubles with the angle and sort of set up. Either it collides with my desk on up stroke or just canāt get the twist reciever in a comfortable location. Wonder if a VESA mount screwed in underneath my desk might work
Since the Fuwatoro is so soft, it should fit in if you squeeze it hard. I wonāt recommend doing it though as this can damage the toy (itās soft, you see).
When I used it with the magic arm I clamped it a little bit to the right so the receiver doesnāt collide with the arm. Now I think of it it must be a rather specific position for it to not collide into my table or the magic arm.
1 Like
In case you have a minute, can you measure the diameter inside the twist? The toys Iām planning to buy are silicone so probably should avoid them being too large or they wont be as āsqueezeableā as the fuwatoro to still fit
72mm. If the toy is elastic it might be fine to go beyond that a little.
Also want to mention that this design has a diameter of 80mm.
1 Like
Is there a guide in how to connect my funscript with the SR1 2.0? Mac User here, so I cannot run windows software 
And I would prefer an offline solution (bluetooth only if possible)
If you find a Solution let me know pls.
I would follow the guide on this site to connect an osr or sr6 to a mac computer. Everything should be the same except for the toy/device your connecting.
I just bought the sr1 2.0 stroker following the aliexpress link posted here. And i got the stroker delivered, but there was no ātwist moduleā in the box. Just a strap and a regular fleshlight mount thing. Not what i was expectingā¦ āsad faceā
What color did you choose? The cheaper one is without the twist
The shop seems to have the exact same standalone twist costing exactly the difference between colors
Yes. I have talked with the person in charge, and realized i bought the just the stroker. But it was very unclear in both the pictures, and the packaging content what i actually was paying for, since it says 360 twist on the main image, and the packaging content mentions the twist in the contents listing. But okā¦ It is what it is.
Sorry that happened! This is one of the benefits of buying the bundles of this device on the OSR Market. The option selection makes it abundantly clear what it is that you are getting:
I live in a Scandinavian country, and the website you refer to does not ship here. I will probably just get the twist module at a later time. At the time of writing this, i dont have any multi axis funscripts anyway. Will wait and see if it some of my fav VR scenes gets updated to multi axis at some point. 
1 Like
Unfortunately, one of the brackets on the twist adapter broke on me. Is there anywhere where I can order just the new adapter?
Also, I found if using a fleshlight with a twist script, it usually falls out of the holder. Does anyone else have this issue when using a fleshlight? I know its designed to hold a fleshlight by default but it doesnt seem very secure.
For the first question, you can find a 3D printing shop to do the printing, or contact the customer service on Discord and ask them to handle it for you.
For the second question, you can avoid it from falling off by increasing the friction. For example, you can wrap a towel around it once.
1 Like
I also broke the bracket on the twist adapter, but this lead to just finding a better adapter type than the one provided in the package. You can see my discord message about this @ Discord
For the fleshlight, I agree they always get loose and flop around and fall out. Frankly this happens to ALL 3d prints that go into the twist design. I think there is just a fundamental flaw in the design here ā which is FLās fault since weāre all trying to cater to that case design, even with different prints that arenāt related to FL. Iāve found that it helps if you just put some masking or painters tape around the bottom ring of the fleshlight case to add some girth to it. It is harder get to insert in the first place, but it stays in place once inserted.
On my osr2 (very similar design) I actually 3d printed a fresh āringā of the main gearning system and the super glued it to an FL case, which is obviously perminantly holds it in place. It works well but it hard to change to another insert (because you have to 1/2 way disassemble the twist module). I havenāt done this for the funsr1 2.0 yet but the model for the ring is on the discord server (Discord) so Iāve thought about printing one of those and trying to do the same. Just a thought.
Iām thinking of purchasing this, but before that, iād like to know how easy it is to connect using heresphere. does it work like handy? also, is aliexpress the only site to buy this?
Can someone post how to get it to twist up and down like this? I tried mess with settings. I am not sure.
Iām using the āmotion generatorā feature in MultiFunPlayer. All I did was adding a looping curve for R0 and L0.