No, I wouldn’t use the cap.. When you receive the powerblow, you get the powerblow cap, an O ring, and an insert that goes into the front of the sleeve case that you put into the sleeve case before inserting the sleeve. This insert sits at the curve of the sleeve case (the section after the opening and before it tapers down into the smaller shaft section). The insert fits between the protrusions of the inner walls of the sleeve case and makes it smooth (for a better seal) and decreases the diameter of the area just before the opening in a way that prevents the sleeve from sliding backwards deeper into the sleeve case. It provides additional support against the larger portion of the fleshlight/keon sleeves and makes it so it won’t slip back.
Have any got the VacuGlide 2 there also havd try a Handy
The OP.
Very cool device.
Got it fully supported by SexLikeReal
Just read it one more anf the link . Can’t see it .
But perhaps I miss it.
Will you recommend ut when obe hsve a Handy
As someone with both yes I recommend if you have the cash. It’s a completely different sensation and highly customizable like the handy. If you get one I highly recommend you try the latex sleeves for a serious wet mouth feeling. There are also strokers and a universal connection for strokers to give them insane suction. Imo they aren’t in the same space. The Handy and more so the handy 2 can be a quick or long affair depending on what you want. The Vacu2 size and setup makes it a luxury. It’s something you want to put time aside for, relax and enjoy. If your into edging or torture it’s a better device imo. Once climaxing it really doesn’t let you go soft. If you got a good seal it’ll just keep sucking, damn thing needs a panic button!..unless your into that.
Recommendation to Autoblow team: Video library needs a “
but she kept sucking” category because the Vacu2 absolutely excels at it. For example stuff like,
https://discuss.eroscripts.com/t/sasha-foxxx-i-said-i-was-going-to-nut-and-she-kept-on-sucking/71765
https://discuss.eroscripts.com/t/luna-star-mornings-blow-01/75585.
On the flip side “after care” category for the more sane like,
https://discuss.eroscripts.com/t/anna-ralphs-the-best-blowjob-ever/234457/10
https://discuss.eroscripts.com/t/teenyginger-40-minute-joi-with-aftercare/84467
We legally license all of the videos in our library which puts some limitations on hosting particular videos but we are looking into ways to allow our machines to be used with videos on third party sites where we host only the script, or some version of this. We are rapidly increasing our library size and aim to be at 2,000 free (for machine owners) 4k videos by the end of 2026. Always open to introductions to performers who might be interested to license to us. We always contact performers who our customers ask us to contact - sometimes with success and sometimes not.
Am I missing something ? Why does he need you to host the video? Isn’t it possible to play local videos with a funscript from here ?
No issue with content, just a suggestion on categories for two specific niches the device does really well imo, so why not highlight them? Post orgasm torture (intense sucking) and post orgasm aftercare (light suckling). Vacu2 has been fun so far, like reviewer said. I can’t wait to see what’s in store. As long as there is something to play my VR library with scripts I’m good.
I believe like the handy it still hits servers. You can play your own local video and script, but the script gets hosted. I’m not 100%, but I believe that’s how it works. My only concern is VR which I haven’t tried locally yet. SLR works great, need to see if I can run my local VR videos on DeoVR like I normally do for handy.
Yeah, I was just referring to the videos that we offer as part of our free library to people who own the machines. But certainly within the web app, you can upload your video of choice and your script, and enjoy whatever video you might possess.
That’s a good point, and actually, I don’t want to announce the performer’s name yet, but we have about 70 videos I’m about to license from a really good performer who does exactly that post-orgasm torture, ruined orgasms, etc.
Yes, we do not host the video, we just host the script. You can use Heresphere to load VR videos locally, as we are integrated for the Ultra but not yet VacuGlide 2. The Heresphere guy said the VacuGlide 2 integration will be ready soon. You cannot upload a VR video to our own player directly, but its on our roadmap. HereSphere already supports this kind of use case so its not super urgent for us.
I’m working on a local player that combines OpenFunscripter with ScriptPlayer but works with VacuGlide2.
It also connects to Intiface central (right now it only connects a gamepad to test vibration which does currently sync with the script action) but I can add support for more devices later.
I did test connecting with the Autoblow API using my VacuGldie2 and VacuScripter controls it very well [using a normal funscript] and it was spot on with the script I tested with, but that script wasn’t really a complex or fast script.
No need to log in, just enter your device token and click connect and it will connect to your VacuGlide2 and sync.
VacuScripter also connects to DeoVR so you can use your VR headset like with ScriptPlayer.
I will test DeoVR connectivity later today to make sure it is working properly, I haven’t tested the code yet but everything else is working as tested.
I will probably add more Intiface device connectivity later but for now I think this is a good start.
I tried to mimic similar keybinds and functions from OpenFunscripter and Scriptplayer.
This does load current funscripts and plays them and the scripts exported from this will load in OpenFunScripter so they should work in ScriptPlayer as well.
I plan on placing this on my Microsoft Store (I have two other apps that I sell on the store, so I already have an established Microsoft Partner Center account) once I have the DeoVR connectivity tested and working.
VacuScripter basic functions will be free for use (typical OpenFunScripter/ScriptPlayer functions), any extra features (not sure what those are at the moment) I might put behind a small pay wall $1.99 - $2.99… but I’m still batting that around in my head.
I need to add a place to change the ip and port for DeoVR connectivity.
I need to add functionality to connect to Heresphere as well.
Hopefully I will get this uploaded tonight and it will be approved for release tomorrow as a Christmas present to the community.
Here is a screenshot of it.
Yes you can zoom in and out on the graph and can adjust plot points like in OpenFunscripter.
You can see the normal position plot points with heatmap.
The green triangle up top is Valve+ Open
The red diamond at the bottom is Valve+ Close
The light green square up top is Valve- Open
The pink diamond at the bottom is Valve- Close
I submitted my VacuScripter app to Microsoft for certification. Once it is approved, I’ll paste the store link here. I set it to free unlimited, so it should not cost you anything to download it and there is no trial period involved.
I tested it with DeoVR and it connects and loads the script for the video, it connects to the VacuGlide 2 and syncs with the script, it will also connect a gamepad to Intiface Central (right now this is so I can take my modified XBox Controller and add vibrations to my VacuGlide 2 sleeve that are sync’d to the script along with the VacuGlide 2).
All tested and works.
I forgot to mention it loads current funscripts which you can add valve points to and save the script with the valve info.
Scripts that are made in VacuScripter do load in OFS and ScriptPlayer like normal scripts (valve info is ignored).
So ready to download this app and looking forward to the paywall option for heresphere! Apparently at v11.0, heresphere allowed direct connect of the og vacuglide. Idk what happened but if you can load a single local script and video directly into autoblows webpage, then this should be a no brainer for the computer literate! Thank you for addressing this! Please share link!
Normal features are not going to be behind a paywall in my app.
By normal I mean any features typically already available for free from current apps circulating in the community (script creation, script player sync, etc)
If there are requests for adding specific features or whatever, then I might consider putting those behind a paywall (I did spend a bit of time and effort making and testing this so a little compensation for my time and effort would be nice)
I’m waiting for Microsoft to get done with the certification so I can publish it. It’s the weekend so most likely not until Monday morning.
It always takes a bit longer on the first certification, at least in my experience. Once the first one is done I can usually get my apps certified and published in a few hours.
I did a full 2 hour session today with VacuScripter and DeoVR in my Quest 2 and it ran without issues.
One script I used was simple repeating patterns not sync’d to video and one I tried was actually sync’d to a video… it was not disappointing.
Definitely not the same as the handy, as far as sync’ing to the video, but definitely a better overall experience for sure.
If Microsoft takes too long to certify or it doesn’t get approved (this is my first time publishing an app of this type/category), I do have this ready to distribute in a MSI standalone self-installer.
The reason I am pushing for a Microsoft release is it will be signed and verified so it is a trustworthy app as far as Anti-virus or Windows security is concerned.
If I release it as a standalone MSI installer it will not be a signed app, not that my app would be dangerous or anything, but I just prefer to release something that is verified and digitally signed. (My day job is as a business application developer, I suppose it has become habit and just my preference because of how I have become accustomed to doing things).
I added a playlist function to the app like ScriptPlayer has so you can queue up multiple videos with scripts. (right-click lets you remove highlighted items individually)
The script creation is bound to numpad keys like OFS (Numpad 0 is 0% and Numpad / is 100% for positional plot points, Pg Up/Pg Dn are Valve- Open Valve- Close, Home/End are Valve+ Open Valve+ Close).
The Heresphere functionality will be in the next update of the app, I still need to test it (only had time to test DeoVR stuff so far, working around kids being home for the holidays, etc… not a lot of privacy to do this stuff).
Wow very cool I am out of town at the moment but will give it a try myself when I return
I resubmitted it to Microsoft for another round of certification.
I made some changes and updates to it, I haven’t tested the Heresphere connectivity but I was hoping one of you will test it and let me know.
I reworked the graph completely, it is really close to OFS implementation.
I added the Heresphere connection functions, hopefully they work right out of the gate, I haven’t had a chance to test it as I mentioned above.
I cleaned up the GUI a bit.
Remember this is a WIP so it will need input from you all as to what is good, bad, needs work, etc.
As soon as it passes certification this round I will post the link (if it doesn’t for some reason, I’ll just post a link to the self-installer that will have to be the way everyone can download it)
Still having issues with certification, they are taking forever to get back to me.
I’m going to release this as an unsigned stand alone MSI installer for now.
That will give you all a chance to test it and give me feedback.
Then I can deal with Microsoft in the meantime.
You will need .net runtime 8.0.22 x64, the app should tell you this when you try to run it and there will be a pop-up that will have a link to go to the Microsoft download site to get the runtime installer.
Download the .net runtime installer (should be named: windowsdesktop-runtime-8.0.22-win-x64.exe)
Run the installer then you should be able to run VacuScripter.
I tested installing this on a fresh Windows 11 machine I have here and it installed and ran, but if you have any issues, please let me know.
Here is the link: