How to Hack a 'Suck-O-Mat 2' (EU) or 'Hummer 2.0' (US) to give Full Controllable Suction for your Handy

how would you rate the suck-o-mat 2.0 as a device on itself ? is the sucking strong ( strong vacuum ) or mild ( fleshlight with cap on ) or how would you describe it.

Can you also change the sleeve with a little DIY to say a fleshlight?

im kinda interested in getting one :eyes:

…love it, worth it’s weight in coin. The suction feels pretty strong, not Venus 2k levels, but considerably stronger than the passive Fleshlight. For example, it’ll take a limp dick and make it hard, it has enough power to act like a penis pump, though with a more gradual effect. When it’s in its natural configuration, it reminds me of the end of some horny dick hunting anime tentacle some succubus had suspended above the bed to torment me with… xD

Yea, using the S-o-M as an enhanced wanking device is REALLY good. It’s actually a devastatingly effective edging machine, you can adjust the intensity to something much lighter than the Handy, but with a blowjob effect. Toe-curling…

There is a learning curve, of course. I suspend some string on elastic from the ceiling, and hold the S-o-M receiver up with that, base just above my pubis. Then it has the freedom to move about ‘on its own’. One should use one’s hand with it. A light squeeze in the right spot dramatically increases the suction / motion effect, it’s very easy to be your own ‘real time’ script machine.

I tried modding a fleshlight, no joy. The beauty of the design is in part in the design of the sleeve. The sleeve is very thick TPE, and fairly high shore hardness for a sex sleeve. As such, it has an intrinsic rigidity to it that a fleshlight doesn’t have, and the suction works perfectly with that rigidity. It’s perfectly tuned, basically. Of course, i have no idea how far from my particular penis size you can deviate before performance drops off because too tight, or too loose. i’m about 12-13 cm, normal sorta proportions, if that helps. Perhaps one could remove the Fleshlight sleeve entirely from the case, and cast some additional silicone round it, that might approximate the sleeve. However, i believe the nubs on the inside are for more than just a nice feeling, i think the way they deform allows vacuum to build and drop quickly at points, which adds to the effect. i really wanna get some new sleeves made for it professionally at some point, maybe chances are there’s no point, and the current one is the best design possible.

At first when i MacGyver’d these two together, i just switched it on and assumed that was that, but i’ve begun to use it without the suction effect for certain scenes, like touching and handjobs, then using the suction for blowjobs and fucking. Result? Even more immersion! One can set the passive suction in the sleeve, with the pump and valves, then it moves about perfectly for whatever the scene is.

Personally, if it was a toss up between the Handy or the S-o-M on a desert island (with porn… and electricity… mmmm…) i’d be hard-pressed to know which to take. The Handy for that ‘you weren’t expecting it!!!’ motion…? Or the S-o-M for the incredible sleeve and blowjob feels…?

Really, i couldn’t say…

:thinking:

(Edit: Yea, with retrospect it would be the Handy… but by goddess, it’s a tough choice… and i’d need a really nice set of sleeves to compensate! And scripts! Obviously…!)

:cry:

2 Likes

hahah what a description, sounds great! I think im gonna place an order soon for the 2.0 :eyes:

2 Likes

Maybe I’m a moron. But how do you order this thing ? I looked all over their website and can’t find how to order the damn thing.

UK IDEALO LINK

^ internet search only, i’m afraid, the company don’t seem to have any meaningful presence.

Oh, top tip before i forget, use X-Lube! That stuff is fucking incredible, started using it recently and the sleeve feels like its on a different level! Mix it nice and thick for full on tentacle porn slime based fun…!

:squid:

I am really intrigued by this, but man that price tag is rough. I’m not sure how I could justify not just getting an OSR at that price point.

I’m guessing something like this isn’t even worth comparing to the real suck-o-mat.

If you wanted to extend the sleeve to take advantage of the Handy’s full stroke range, do you think you could take a thin sleeve like this (these are actually my favorite daily use sleeves and here’s my post on how to secure smooth sleeves to the Handy strap), cut off the top, and then pull it over the lower part of the suck-o-mat sleeve? I understand what you’re saying about the sleeve being tuned to the machine which is why I’m asking.

If anyone is thinking about this, and is also looking for a hands free setup, check out my post here. The looping gooseneck design should be perfect for hanging a toy like this one. I made the gooseneck on mine more rigid by taking some plastic tubing, slitting it up the middle, sticking it on the gooseneck, and then wrapping some tape around it.

I’m seriously not trying to spam my own posts. :rofl: I just hope someone might find it helpful.

…i absolutely hear you on the price tag, in terms of any advantages over the OSR i’d have to say it would probably be situational. Personally i don’t have an OSR, would love to, but a) don’t have a PC in bedroom, use Quest 2 for everything, and b), want the least hassle possible, and c), there’s a noise factor to consider, would have to install very expensive servo’s i think… not sure about that bit. Additionally, a Suck-OwO-Handy is two machines, it’s modular, so one can choose to use one on its own, if appropriate. Oh, and it doesn’t need multi axis scripts. And the suction is active, not passive.

Obvious big disadvantage is that it isn’t an OSR+/SR6, (i REALLY want one of those at some point in my life, it’s just not feasible atm) so not multi axis, completely different kettle of fish, wtvr.

OMG, that thing on Aliexpress… yea, i can’t see the pump on that lasting more than six hours at best. However, the principle is sound, and fascinatingly… the receiver has nubs in it! I’m guessing they nicked the design, so the question for me is, can i use this as a spare / alt. sleeve? Is the quality of material appropriate? Only one way to find out! i’ll order one and see, but no, there’s no way that pump is gonna hack it. FYI, bought one of these once to experiment (not the cow… the pump…):

It was terrible, hardly any suction, LOUD AS FUCK!!! Sent it back within an hour.

Extended sleeve ideer is really clever, you’d need a bit of trial and error to get it right, be nice to find a sleeve that has a thick section and a thin one, in two obvious bands, then cut away any extra faf and use the thin part around the Suck-OwO-Handy sleeve, and the thick bit extending below. Nice.

Personally, i can’t see why those goose necks don’t buckle under all the thrusting and so forth, is the torque on them really strong? i have my Handy attached very strongly to the specially thinned end of a short solid bath bench thing made of wood, and because there’s quite a lot of intrinsic weight in the bench and all, it can move about whilst acting like a dampener, stops the Suck-OwO-Handy from ‘tearing itself apart’… maybe… i dunno… there is quite a lot of torque thumping around down there at times, what with the suction going one way, and some crazy vibration heavy cock wrencher of a script going the other way, lots of X-lube really helps too! i’d love to see somebody else have a hack at it, i’ve kinda settled on my way of doing it, would love to know what other ways there are…!

1 Like

Please let me know when you get the cheap Aliexpress version. I would love to know what you think of it. Maybe someone can figure out how to hack it to a stronger pump.

Those sleeves I linked to are really cheap, thin, and light so you might be able to put two on each other or find another way to thicken the lower section.

Once I wrapped the plastic tubing around the goosenecks, I’ve never had any trouble with stability. The Handy is mounted to it and positioned so the buttons are facing you as it was intended to be used. That means the bottom of the device is actually resting on you. Additionally I put some towels and blankets on top of the whole set up which not only works great as a noise dampener but also adds some extra weight. The whole thing is very comfortable and quiet. I initially used it at a desk with the suction cups stuck to the table, but now I just use it lying in bed with the suction cups under my legs.

Didn’t someone here develop software that allows ScriptPlayer to talk to two Handys at once? Maybe there could be a way to make sucking scripts for the suck-o-mat and other sucking machines to be used in combination with the Handy. If nothing else, maybe it could take a regular stroking script and turn on the suction during the upstrokes. The strength of the suction could be determined by the length of upstroke or just randomized suction strength might be even better and more realistic. Then again maybe the OSR already has a module for this.

…i don’t always quote myself, but when i do, you can bet it’s so i can have a massive wank because i’m a lazy cunt.

Yea, as above, decided to make some Frankensteins’ monster of a sleeve out of the Quickshot and the OG sleeve.

IF it works, it could potentially solve the main issue i have with encouraging people to go out and invest in the tech, which is the lack of sleeves that work with the vacuum effect.

IF this works, then the Suck-OwO-Handy potentially can be used by peeps with larger than regular sized ‘meatsceptres’, and introduces a variety of different sleeves, with different textures, where before there was only the one.

IF…

Edit: LOL, they make a connector for Quickshot, so you can put two in series, if you have a particularly long cock! Could mean that Handy-OwO-Suck Quickshot sleeve hack could be adapted for really long peeps! Awesome…!

Link to Quickshot Connector

…cheap Chinese sleeve vacuum thing arriving Dec 10th… sigh… In relation to my random jibber above, maybe cheap Chinese sleeve could work with Quickshot as well… Hmmm…

Ahh! i missed your bit about the plastic tubing. Yea, sounds perfect, solid base like that would do perfect for the high torque of suction device mod, plus anything you can use comfortably in bed is an absolute win for me.

On the subject of fully automating and scripting for a Suck-OwO-Handy, believe me when i say, i have spent a LONG time thinking about that. You would need a script for:

A device that allows one to program [click_up/click_down] on the vacuum pump.
A device that allows one to program [on/off] on the T-valve.

But… there are issues…

The timings of the pump and valve are, in my mind, very dependent on the state of one’s own biology at that moment. Yea, i will initiate various patterns dependent on the actions, to enhance the immersion, but i also need to make adjustments to ‘trim the sails’ as it were.

Now, i don’t know how much of that is because of my own stupid getting older biology, or what. It could very well be that the devices would work perfectly well, just incorporate some basic ‘trim_sail’ protocols in the script, it would work. And it would be awesome to have the T-valve automated, that fucker does some weird shit to your boihood at times, be interesting to feel what that’s like cycling on and off.

BUT… i don’t even know if they make S-o-M any more… i’ve no problem tearing one open and spending weeks / months learning all about electronics (properly), i just wonder how much use it is to anyone else… be fun to have ones own unique Frankensteins’ wank machine though!!! xD

Edit: Also, a massive advantage that the Suck-OwO-Handy has is that it only needs a single script, so i can use it with a Quest2 in bed, and nothing else, other than a Wi-Fi connection. i hate ANYTHING that breaks immersion, and not having to deal with a PC and a suite of apps and programs that all need to function seamlessly… (*shudders, no thanks…) i get stressed enough when the damned Handy servers are down, last thing i need are numerous other levels of [this_could_all_go_tits_up_at_any_moment!!] floating around whilst i’m trying to lose myself in the moment.

Also, i REALLY need to redo the front end of this post, in the many months i’ve been using this hack, my technique has changed considerably, and the front end needs to reflect that…

2 Likes

Just wanted to leave this here so i don’t forget:

It’s an open-ended stroker with nubs in it, might be useful for extending down below the main sleeve. Or something…

Or if it will fit and stay inside a Quickshot case you can use the connector and stack it on top of the Vantage for intense head stimulation.

1 Like

Hmmmm…

:thinking:

One thing that works here is to use a (very stretchy) cock extender sleeve with open end. For example something like:
afbeelding

The ballstrap will always put some tension on the receiver so even when it pops off, its wont completely seperate so the next stroke it will be fine again. And usualy because these sort of sleeves are very stretchy, it wont block the motion at all, but still prevent full pop off.

While it obviously still has its limit, it can make it a lot more convenient. This allows you to realy go to the limit in stroke length because a single pop off isnt going to be disruptive as it just continues. Especialy when you are trying to make it focus on the tip, this makes it a lot easier to search for its ideal pressure value.

This could also make the tremblr safer when combined with the handy, because this sleeve will essentialy prevent a pop off from having the handy push your dick into the moving parts. I still would not recommend combining the 2, because i think they just have a conflicting effect. But maybe at very low suction values it will work.

1 Like

…oh, that looks fun! It would jiggle your balls around all over the place with a Handy, you should post it on the Handy sleeve thread. A quantum leap ahead of rubber bands.

The ‘pop off’ with the Tremblr is a tuning thing, basically if it’s popping off it’s not set right anyway. But it might be fun to squeeze that thing over the Tremblr receiver and see if you can try and rip your cock off without actually ripping your cock off… that’s probably what it would feel like… mmm… waterboarding your cock… nice.

Should one then attach a Handy to that cock wrenching monstrosity? Probably not, but that’s why we have science, so we can experiment!

The Suck-O-Mat sleeve combined with this would be more Handy friendly, the Tremblr develops too much of its own motion. I must conduct more research…!

Good call, tyvm.x

The sleeve is far too stretchable for that jiggling to happen. Just note that to strap it on the receiver you already make the diameter 3x the normal size (and you can easily stretch it further to like 5x). This same stretching also happens acros its length. And thats why it works, it does not disrupt the motion, but it does pull back the receiver in case of a pop off.

But yes, such sleeve will at least help in the cases the receiver is having some heavy side to side motion that normaly would cause a pop off to happen. But that waterboarding experience isnt going to happen. The sleeve is just too weak for that. But still, its at least another experience you can reliably trigger that way, which otherwise might not have been possible.

1 Like

The ingenuity on this board never ceases to amaze me

1 Like

so i got the SoM and its quite something else hahah, i love it. Tried the combo with it being strapped into the handy + a MHBHJ blowjob vid and that was ooooffff

but…the sleeve feels a little short for my ~15cm. I need to find one thats a little longer or find some DIY that works

1 Like

Where did you buy it from ? I did a quick search the other day and couldn’t find anywhere to order it. I’m in the USA if that makes a difference

i found plenty of online sextoy shops in Europe that sold it